Tom Silva Archives - Learn statusrc

Download

In this video, This Old House host Kevin O’Connor and general contractors Tom Silva and Zack Dettmore meet at the shop to discuss toolbox organization.

SUBSCRIBE to This Old House:

Host Kevin O’Connor and general contractor Tom Silva enlist the help of carpenter Zack Dettmore to better organize a tool storage cabinet.

Where to find it?
To create custom drawer foam inserts, start by laying out tools on the foam board [ Once you’ve arranged the tools, neatly trace around them to create a form guide. Follow the tool outlines with a utility knife and scoop out the foam innards until the tool fits snug in the opening.

Use aluminum u-channels [ and custom cut them to the perfect dimension to divide different drill bits.

To create a U-channel drawer storage
1. Use the miter saw [ with a metal cutting blade [ installed, measure, mark and cut the u-channel to each desired dimension.
2. Smooth the cut edges of the u-channel with a metal file [
3. Apply the magnetic tape [ to the back of the u-channel. The tape is peel-and-stick, so there’s nothing particularly difficult about this step to keep in mind.
4. Place the u-channels in the drawer in the desired orientations.
5. Place the drill bits [ in each compartment.

Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free:

Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet:

About Ask This Old House TV:
From the makers of This Old House, America’s first and most trusted home improvement show, Ask This Old House answers the steady stream of home improvement questions asked by viewers across the United States. Covering topics from landscaping to electrical to HVAC and plumbing to painting and more. Ask This Old House features the experts from This Old House, including general contractor Tom Silva, plumbing and heating expert Richard Trethewey, landscape contractor Jenn Nawada, master carpenter Norm Abram, and host Kevin O’Connor. ASK This Old House helps you protect and preserve your greatest investment—your home.

Follow This Old House:
Facebook:
Twitter:
Pinterest:
Instagram:

How to Organize Tool Storage Drawers | Ask This Old House

Download

This Old House general contractor Tom Silva helps a homeowner install a rain gutter, downspout, and rain barrel. (See below for a shopping list, tools, and steps.)
SUBSCRIBE to This Old House:

Shopping List for Installing a Rain Gutter:
– Aluminum gutter
– Aluminum downspout
– Aluminum elbows, end caps, mounting straps, and downspout outlet
– Gutter hanging brackets, for securing the gutter to the house
– Sheet metal screws, used to fasten together the gutter and downspout parts
– Gutter sealant, for creating waterproof connections between gutter parts
– Two 2-inch-thick concrete pavers, used to create a solid base for the rain barrel
– Rain barrel and diverter, used to collect rainwater

Tools List for Installing a Rain Gutter:
– Chalk line
– Tape measure
– Drill/driver
– Level
– Caulk gun
– Crimping tool
– Hacksaw and tin snips
– Hammer and cold chisel (or hole saw), used to cut a hole in the gutter
– Ladder

Steps for Installing a Rain Gutter:
1. Snap a chalk line across the fascia, creating the proper pitch toward the downspout end.
2. Measure the fascia to determine the length of the gutter.
3. Apply gutter sealant to an end cap, then press the cap onto one end of the gutter.
4. Secure the end cap to the gutter with a crimping tool.
5. Use a hacksaw and tin snips to cut the gutter to length.
6. Use a hammer and a cold chisel (or a hole saw) to cut a round hole in the gutter for a downspout outlet.
7. Apply gutter sealant to the flange of the downspout outlet, then screw the outlet to the hole in the gutter.
8. Temporarily screw the gutter to the fascia, positioning it about 2 inches below the chalk line.
9. Install hanging brackets onto the gutter, positioning one in front of each rafter.
10. Raise the gutter to the chalk line and fasten each hanging bracket by screwing through the fascia and into the rafter tail.
11. Set two 2-inch-thick concrete pavers on the ground directly below the downspout outlet.
12. Set a rain barrel on top of the concrete pavers.
13. Use a hacksaw to cut and assemble the downspout and elbows.
14. Screw the upper end of the downspout to the downspout outlet protruding from the gutter.
15. Fasten the downspout to the house with mounting straps.
16. Install a diverter in the downspout, positioning it even with the top of the rain barrel.
17. Attach a short length of downspout to the underside of the diverter.
18. Connect the diverter’s flexible hose to the port on the side of the rain barrel.

About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we’re ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O’Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.

Follow This Old House and Ask This Old House:
Facebook:
Twitter:

Pinterest:
Instagram:

Tumblr:

For more on This Old House and Ask This Old House, visit us at:

How to Install a Rain Gutter | Ask This Old House