proud paper official

How To Make a Paper Ninja Star (Shuriken) – Origami

by

Download

Subscribe for more amazing videos! ► ◄

Here’s a remake of my ninja star tutorial from a couple years ago.
If you couldn’t get it because i was too fast or you couldn’t assemble the pieces this video will probably help you out!
I tried making this tutorial even better than the previous one, especially the assembling of the units since that was the problem for most people.

It’s also nice that the video quality is better here.
If you get stuck somewhere let me know in the comments and you can pause the video, watch it again or see if my previous tutorial was clear:

Grab a piece of paper and start folding, good luck!

Please Subscribe

How To Make a Paper Boomerang – Origami

by

Download

Subscribe for more amazing videos! ► ◄

Paper: Printer Paper
Size: A4 / Letter Sized

How To Make a Paper Boomerang – Origami
Welcome to my tutorial on how to make a paper boomerang (Really comes back!!).
Start off with just a normal sheet of A4 or letter Sized (8.5 x 11 inches) Printer Paper. With one sheet you’ll be able to make 2 boomerangs!! Scissors to cut the paper in half are optional, as you can also tear the paper like I do in this video.
If you follow all the instructions in this tutorial carefully it should be quite easy to make. Just make sure that you make really good creases and that the boomerang is as flat as possible. Neatness really counts with this model.

If your boomerang does’t fly back, first make sure your model look exactly the same as mine. Throw the boomerang slightly upwards and spin it.

I hope you guys will have a lot of fun with this boomerang and that you can impress your friends 🙂 If you enjoyed the boomerang, share this video with your friends.

Thanks for watching and don’t forget to comment, rate, and subscribe to my videos.

My Channel:

How To Make a Paper Transforming Ninja Star – Origami

by

Download

SHARE, COMMENT, LIKE and SUBSCRIBE for more awesome tutorials! ► ◄

Paper: printer paper / dimension paper (or origami paper)
Size: 9cm x 9 cm or 3.5 in. x 3.5 in.

In this tutorial I teach you how to fold the Transforming Ninja Star or Shuriken (designed by Robert Neale). It is a modular origami model which means that you can make the transforming ninja star by interlocking the units together.

All you need is 8 small square sheets of paper. I am using paper size 9cm x 9cm. If you use printer paper just make the printer paper into a square and split it into 4 pieces.

Please Subscribe!

Learn To Make These Other Awesome Models!

Ninja Star:

Magic Rose Cube:

World Record Paper Airplane:

Dinosaur:

Boat (That Floats!):