diy web slinger

Download

HOW TO MAKE Spider-Man Web Shooter That Shoots EASY – WITH TEMPLATES

Support me on Patreon here:

FREE TEMPLATE:
***YOU WON’T BE ABLE TO ACCESS THE TEMPLATE IF YOU ARE LOGGED IN ON A SCHOOL EMAIL***

How to print the template:
1. Download Adobe Acrobat Reader here (for free):
2. Right click on the template, then click “Open With” and “Adobe Acrobat Reader DC”
3. Click the printer icon at the top left
4. Under “Page Sizing & Handling”, click “Size”, then select “Actual Size” (FYI these templates were designed to fit my wrist which has a circumference of roughly 5.5 inches, so you may need to elongate the wrist strap piece if your wrist is larger than mine)
5. Click “Page Setup…” and specify what type of paper you are using (US Letter for example) before printing

Oops, I made a few mistakes in the video! Here are some important corrections:
1:00 – I meant to say “1mm or more”, not “1mm or less”
1:24 – The wire thickness should say “.8mm”, not “.6mm”
1:27 – I meant to say “25 6mm magnets”, not “9 6mm magnets”
11:10 – I meant to say “piece 19 and 20”, not “20 and 21″
Anyway, stay tuned for more Spidey videos! Thanks y’all 💙

Materials:
spring:
5mm magnets:
6mm magnets:
1/16” cardboard:
black acrylic paint:
red acrylic paint:
silver acrylic paint:
paint brushes:
string:
jumbo popsicle sticks:
bamboo sticks:
super glue:
masking tape:
duct tape:
hole puncher:
tweezers:
craft knife:
replacement knife blades:
cutting mat:

Film equipment I’m currently using:
cameras:

lenses:

microphone:
shotgun microphone:
tripods:

lighting:

Music:
Bit Coin – Otis Mcdonald

Doing Just Fine – LAKEY INSPIRED

DISCLAIMER:
This description contains affiliate links, meaning if you purchase something using those links, I will receive a small commission. The links do not cost you anything extra at all, but clicking on them to buy something helps out the channel!