Making RC trainer model airplane for beginners. Brushless motor, Four channels.
Necessary Materials:
* 2212 980 or 1400KV Brushless Motor:
* 8×6 propellers: OR
* 30A Brushless ESC :
* 1 x LiPo Battery 11.1V 1000 mAh:
OR 11.1V 1300 mAh: OR
* (2pcs) 40mm wheel:
* 4 pieces horns:
* 4 or 6 channel radio control system: OR
OR
* 4 micro servos (may be 9gr servos): OR
* Gold Connectors 3.5mm:
* Wheel stopper:
* Y extension cable:
* Adjustable Linkage stopper (Easy Link):
* Pushrods & landing gear rod:
* L type nylon clevis keper clip:
* Canopy Hatch Lock :
* Fiber Strips Adhesive Tape :
* Fastener strip :
* Brass Tube:
* Plastic Tube (2×3):
* Optionel steering arm:
Lipo Battery Charger: OR
Hot melt Glue Gun: OR
OR
Screw Locking:
Onboard Camera:
RUN CAM II 1440P:
RUN CAM II 4K:
Thanks for watching. If you want to support my channel, join.
Some of the shops that sell Kraft Foam Board:
Technicial Specifications:
Lenght: 640 mm
Wing span: 810 mm
Flight weight: About 495 gr
Center of gravity: 4.6-5.2cm from the front of the wing
Required control system: Min. 4 channels, 4 micro servos
Suitable battery: 11.1V 1000Mah – 1300Mah Lipo battery
Suitable motor: 2212 Brushless Motor (980-1400KV)
Suitable propeller: 2 Blade 8×6 (8060)
DIAGRAMS and DETAILS:
My Web Site (KendinYap): www.rcpano.net
All of my videos :
Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos.
Share with friends :